Your source for downloadable, step-by-step sewing patterns and project instructions!

Banded Beret

Format PDF (Download Only)
Author Indygo Junction Inc
Price $9.99
Rating No Reviews Yet (Be the first to rate it)
Share
Earn 9 points at checkout. What are points?

The banded beret hat is a very simple and a delightfully quick project. Made from quilting cottons, recycled menswear or repurposed denim, choose a coordinating lining fabric. Made from wool felt or fleece, hat is unlined. Simple to construct with hidden back elastic for good fit. This construction method will introduce you to a wonderful tool – the pressing ham. Directions included for a flower & leaf embellishment.

Copyright

No part of this eBook/ePattern may be reproduced in any form or by any electronic or mechanical means including information storage and retrieval systems, unless otherwise stated, in which case reproduction is limited to the use of the purchaser without permission from the publisher, Indygo Junction. The written instructions, photographs, designs, projects and patterns are intended for the personal use of the retail purchaser. It is a violation of our copyright to share, forward, or in any way distribute this electronic PDF pattern to any other party. It is strictly for personal use. A limited license agreement is available for making this item for resale.

Note: www.YouCanMakeThis.com provides this copyright & terms of use policy review as a courtesy to our site users and eBook authors. The copyright policy applies to the associated eBook and is specified and owned by the individual eBook author.

View A - Wool Felt or Fleece Version
Wool felt – ½ yard for solid version OR two
coordinating ¼ yard pieces for contrasting band & flower embellishment OR Fleece - ½ yard
24” x 4” of lightweight fusible interfacing

View B – Cotton Fabric Version
½ yard fabric for hat and band (this is also enough yardage for hat lining)
Optional: ¼ yard fabric for contrasting hat lining
½ yard of lightweight fusible interfacing
Assorted buttons for trim

View C - Recycled Menswear Version
1 leg of denim jeans, menswear trousers or a
mixed assortment of wools, jeans or menswear
½ yard of lightweight fusible interfacing for
lightweight menswear version only 24” x 4” piece of lightweight fusible interfacing for denim or wool version only
¼ yard wide fabric for contrasting hat lining
Optional Flower Embellishment:
8” x 11” piece of lightweight paper backed fusible web
1” button for flower center

View D – Denim Shirt Band Version
1 lightweight denim button up shirt-any adult size
1/3 yard of fabric for hat top, decorative ribbon/
tube on band, and bow embellishment
Optional: 15” x 1-1/2” strip of contrast fabric for
decorative ribbon/tube on band
¼ yard of fabric for contrasting hat lining
Optional: ¼ yard of lightweight fusible interfacing
for lightweight cotton only (to fuse to hat pieces)
12 1/2” x 4” piece of lightweight fusible interfacing
for back hat band
1 or more small buttons for bow embellishment

Notions needed for all versions:
8” piece of wide bias tape or 1” wide soft grosgrain
ribbon
3-1/2” piece of 5/8” wide elastic
Matching thread, pins and safety pin
Optional but very helpful: Pressing Ham, but rolled
up towel will work as substitute

You might also like: